Thanks to design, Magnabend electromagnetic bending Magnabend Magnetic sheet metal pan and box brake makes incredible blanks: it produces products of the most unusual and complex configuration. The basis of this Magnabend Magnetic sheet metal pan and box brake is a longitudinal electromagnet with a clamp strip made of steel and placed higher. Workpiece, in the process of work is fixed due to a powerful electromagnet between the two slats. The desired bend is formed by turning the bend bar (it is located in front of the Magnabend Magnetic sheet metal pan and box brake and is attached to unusual hinges).
When working, the workpiece is fixed to the bending Magnabend Magnetic sheet metal pan and box brake by an electromagnetic press with a force of 6.0 tons/meter. Bending with the help of Magnabend is carried out by turning the beam, fixed on special two-axle hinges. Force is applied only in the place of its creation; It does not need to be passed along the chain further – to the support elements that are behind the Magnabend Magnetic sheet metal pan and box brake. Therefore, the clamping mechanism does not need the massive nature of the structures, hence the technique acquires a neat, small-sized appearance and produces sophisticated technology products. The ability of the clamping bar to pass through the required volume of magnetic flux dictates the parameters of its thickness. Profile blanks are obtained qualitatively even due to the same effort to fix. The bending Magnabend Magnetic sheet metal pan and box brake is very wear-resistant (resource not less than 10 years), because friction of details is not involved at all.
Since the Magnabend Magnetic sheet metal pan and box brake structure consists of unusual hinge loops in the form of a sphere located along the entire length of the folding rack, the Magnabend bending Magnabend Magnetic sheet metal pan and box brake no longer needs a massive bending traverse to create the rigidity of the whole mechanism. So, the small size of the Magnabend Magnetic sheet metal pan and box brake is preserved and its productivity is increasing.
On this Magnabend Magnetic sheet metal pan and box brake there are no restrictions on the sheet feed – so called. full-speed Magnabend Magnetic sheet metal pan and box brake. A precise and correct location of the part on the desktop is provided by brackets with sheet feed limiters.
The presence of a protractor helps to determine the bending angle in the manufactured product. Due to the comfortable corner stopper of the bending beam, the desired bending angle is set and the number of bending repeats that is necessary is carried out.
The control panel (located on either side of the Magnabend Magnetic sheet metal pan and box brake) and the pedal remote control helps to increase productivity, because the employee’s hands are now free, and he can quickly mark the workpiece in the work area.
The Magnabend Magnetic sheet metal pan and box brake allows to create products of a difficult configuration, thanks to an open end structure. If you set benders in a straight line, you can perform an operation with a long bend.
The tool tray and the parts of the split beam are located next to the work table.
The Magnabend bending Magnabend Magnetic sheet metal pan and box brake is equipped with a dual-mode electromagnet. The locking mode spends 30 percent of the working power, it starts after the location of the part in the work area. The operating mode is used when the bending traverse begins to move. When the bending is completed and the bending traverse is retracted to the initial position, the workpiece is automatically released. This scheme of actions is the key to increasing productivity and saving the worker’s energy. The bending Magnabend Magnetic sheet metal pan and box brake does not allow overloading the built-in protection. When overestimating the maximum possible capacity of the equipment, the clamping bars are easily attenuated. As a result, possible Magnabend Magnetic sheet metal pan and box brake failure is almost impossible.
Post time: Apr-06-2023