Factory Cheap Industrial Bending Machine - sheet metal bending machine, magnetic pan and box brakes, manual folding machine Magnabend 2000E – JDC

Product Description

Superior clamping force along with unquestionable build quality leaves.
Bends all types of sheet metal, aluminium, copper, stainless steel and much greater versatility than conventional sheetmetal benders.
Typical industries: Roofing, Aircraft, General Sheet Metal Fabrication.

Features

Electromagnetic sheetmetal folding machines
To suit: roofing, aircraft, general sheet metal fabrication and training colleges
Electromagnetic clamping
Manual fold
Suitable for all sheetmetal, aluminium, copper and stainless folding
Perfect for deep forming of channels, closed sections and all those hard to do folds
Foot pedal control on MB1250E ~ MB3200E only
All models supplied with short bar clamp and slotted clamp bar sets

Includes

Calibrated back stop
Full length bar, slotted bar, segmented sections & thin bar
Foot pedal clamping
Storage tray
Operation manual – video available

Technical Data Snap-Shot

2500mm x 1.6mm bending capacity
Superior 12 Ton clamping force
Shipping dimensions – 2710mm x 340mm x 340mm = 0.313m2
Power – 240Volt 1Phase – 15Amp
Approx weight: 330kg

Easy, hands-free operation:

Put a piece of material between the clamping bar to the depth required.
Engage the powerful magnet in the bending bed with push button control.
Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material.
Lift the bottom bending leaf to complete the bend.

Recommended for:

The magnetic sheet metal brake is best used in HVAC shops, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics, and more.

The JDC BEND magnetic sheet metal brake is a unique box and pan brake that has endless bending possibilities when compared to conventional sheet metal brakes. Requiring a common 220 volt, single phase power supply this folding machine can bend boxes or pans to almost any depth since it isn`t reliant on conventional finger depths. A powerful magnet in the bending bed can be engaged by foot pedal or push button control to hold down a mild steel clamping bar of almost any configuration across the bed width or bed length. The sheet metal is pinned between the magnetic mild steel clamping bar, at this point the bottom bending leaf can be lifted to complete the bend.

The mild steel clamping bar can be made of straight bars (of various widths if you had very tight boxes to make) for straight bends or segmented clamping bars for box and pan applications of any other configuration. Again, because of the unique design the operator is not limited to the depth of the item since you are no longer limited by finger length.

Our JDC BEND magnetic sheet metal brake can bend (items impossible for traditional box and pan brakes) totally enclosed boxes, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more. This bending machine is perfect for bending sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics, and much more.